1-ply woven panel "ANHUI" / 4 mm
The single-layered plates may be used on a support. It is recommended in most applications to install the panels on both sides of the substrate to prevent any deformation. The result is a “sandwich panel”.
price incl. tax
30,35 €
per m²
price incl. tax
451,65 €
per unit
price excl. tax.
379,54 €
per unit
SRP incl. tax
531,35 €
per unit
Attention: before pressing the panels both glue surfaces have to be sanded to create an optimal adhesion between the panels. This is especially important for cold pressing where multiple panels are piled and pressed at the same time.
- Advised room conditions: temperature approx. 20°C. Air humidity 50-65%.
| Brinell hardness | 9.5 kg/mm² EN-1534 |
| Shrink and swelling | 0,14% per 1% change in moisture content |
| Moisture content | 10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity |
| Gross density Bamboo | 1050 kg / m³ |
| Emission Formaldehyde | Class E0 ( 0,025 mg/m³) 3*) (EN 717-1) |
| Durability & strength | Class 5 (EN 350) |
| Use Class | Class 1 (EN 335) |
| Gluing | D3 Waterproof |
1-S Platte "ANHUI" / 4 mm
tolle Ware, aber muss der Preis wirklich so teuer sein...?
Lieferung und verpackung waren einwandfrei
1-S Platte "ANHUI" / 4 mm
Schnelle Lieferung der Bestellung, die Platten sind sehr gut, jedoch wäre es wirklich von Vorteil kleinere Verpackungseinheiten zu bekommen
Volume discounts
| Quantity | Discount | You Save |
|---|---|---|
| 14 | 20% | Up to 1 264,62 € |