Recommended Glue

- Always follow the advice of the glue factorie -


flooring-glue              product: 

  • Bona                     R770
  • Bona                     R850* dieser Kleber Bitte nicht für Industrieparkett benützen

  • Forbo                    144 Euromix PU
  • Forbo                    157 Eurowood MS Hard Elastic
  • Forbo                    158 Eurowood MS Hard Elastic Sepia

  • Stauf                     HLU-545
  • Stauf                     HLU-570
  • Stauf                     PUK-445
  • Stauf                     PUK-450

  • Wakol                    PU210
  • Wakol                    PU225
  • Wakol                    PU350
  • Wakol                    MS260

Attention,
*) Due to lack of information, as well as extremely bad experiences, we advise against the use of SikaBond parquet adhesives.
We do taking no responsibility and no warranties on the use of adhesives Sika Germany GmbH.

Open structure / moisture absorbig subfloors

(sand cement, anhydrite, wood, gypsum) type of glue - dispersion glue 

pay attention to

  • Floor has to be fully flat. If not, floor has to be leveled.
  • Wait 10 - 20 minutes until glue surface becomes frosted / matt. Glue is ready when it sticks to your finger.
  • Never use more glue per sqm than indicated in this glue advice!
  • After installation use heavy roller to secure adhesion.

    Approved glues                  Towel      Applying amount (g/m²

    Bostik Sadertac V3                   B1                 300-350

    Forbo Eurocol 640                     A2                 225-275

    Forbo Eurocol 540                     A2                 250-350

    Mapei Mapecryl                        A2/B1             250-350

    Uzin MK82                               B3                  300-350

    Wakol D3360                           A2/B1             300-350

 

Closed strukture / non absorbing subfloor

(concrete, ceramic, coated floors,)  Type of glue - Hard elastic silan glue 

pay attention to 

  • Real glue adhesion starts after approx. 2 hours. so in meantime do not walk on the installed boards or push them too much!
  • Never use more glue per sqm than indicated in this glue advice!
  • After installation use heavy roller to secure adhesion (this can be done after the glue starts to adhere, so approx. 2 hours).

    Approved glues                 Towel        Applying amount (g/m²

    Bona R850                              B1                 300-350

    Mapei S955                             A2/B1            300-350

    Uzin MK100                             B3                 300-350

Attention,
*) Due to lack of information, as well as extremely bad experiences, we advise against the use of SikaBond parquet adhesives. We do taking no responsibility and no warranties on the use of adhesives Sika Germany GmbH.