Woven Top Kick parquet is a 3 ply bamboo flooring with a 2.5 mm thick layer of cobam, pressed on a HDF carrier material and a softwood return. With this structure in connection with the Uniclic system that bamboo flooring is easy to install.
price incl. tax
price incl. tax
price excl. tax.
installation summary (full version available on www.crownbamboo.eu)
• Check room climate conditions (room temp. 18-20°C, air humidity 50-65%).
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum allowed moisture content (for example 1.8% for sand cement).
• The floor should be installed floating (max width 7m, max length 12m, using expansion gaps) but can also be fully glued to the subfloor (for glue details see full version of installation instruction).
• If your bamboo engineered boardis equipped with a click system, you can install the floor without using glue.
• This floor type can be installed – under certain conditions – on warm water floor heating. See “Crownbamboo flooring and floor heating“.
• After installation: make sure proper cleaning and maintenance is done, fitting to the chosen finish.
|Brinell hardness||≥ 4 kg/mm² (SP/PP), ≥ 9,5 kg/mm² (EN 1534)|
|Shrink and swelling||0,14% per 1% change in moisture content|
|Moisture content||10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity|
|Gross density Bamboo||+/- 700 kg/m³ (SP/PP), +/- 1050 kg/m³|
|Fire resistance||Class Cfl-s1 (EN 13501-1)|
|thermal conductivity||0,17 W/mK (SP/PP), 0,18 W/mK (CB) (EN 12667)|
|Thermal resistance||0,0591 m2K/W (SP/PP), 0,0542 m2K/W (CB) (EN 12667)|
|Emission Formaldehyde||0.01 mg/m3 (E1 Norm: max. 0.124 mg/m3)|
|Durability & strength||Class 5 (EN 350)|
|Use Class||Class 1 (EN 335)|
|Modulus of Elasticity||USRV 31 (Glatt) / USRV 28 (Geburstet) (CEN/TS 15676)|