Bamboo parquet "MACAU"
Crownbamboo solid floor boards, either with strips pressed together horizontally (plain pressed), vertically (side pressed). This floor type is a good solution when an economical but high performance bamboo floor is required. Stave parquet (in plain pressed version) was the first bamboo floor ever, all other bamboo floors have been derived from this classic version.
Write a review
price incl. tax
0,00 €
per unit
price excl. tax.
0,00 €
per unit
New
Delivery in 5-6 business days
Description
Data sheet
Reviews
Description
Installation summary
(full version available on www.crownbamboo.eu)
- Check room climate conditions (room temp. 18-20°C, air humidity 50-65%).
- Check subfloor: this should be flat/clean/stable and should not exceed the maximum allowed moisture content (for example 1.8% for sand cement).
- The floor should be fully glued (for glue details see full version of installation instruction) and can also be installed floating (max width 5m, max length 12m, using expansion gaps).
- Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives only can be used, when:
Shear strength Ts > 1.4 N/mm2 (3 days balanced at 23 degrees Celsius/50% Air Humidity)
- Shear elongation y >=0.5 (3 days balanced at 23 degrees Celsius/50% Air Humidity) Please ask your glue supplier for more information.
- This floor type can be installed – under certain conditions – on warm water floor heating. See “CROWNBAMBOO flooring and floor heating“.
- After installation:
make sure proper cleaning and maintenance is done, fitting to the chosen finish.
Data sheet
| Brinell hardness | ca 4.0 N / mm2 |
| Shrink and swelling | 0,14% per 1% change in moisture content |
| Moisture content | 10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity |
| Gross density Bamboo | 700 kg /m3 for bamboo |
| Fire resistance | EN 13501-1-2002 Building material class B1 to DIN 4102 (UK: Standard BS 476 Part 7) |
| thermal conductivity | λ gleich 0.17 W m K |
| Thermal resistance | R gleich 0.08 m2 - K/W |
| Emission Formaldehyde | 0.01 mg/m3 (E1 Norm: max. 0.124 mg/m3) |
