Woven (2-ply flooring) "ANHUI"
Woven (2-ply flooring) "ANHUI" is made from two layers of bamboo, with a 3 mm toplayer of woven (high density ComBam) and a cross pressed bamboo backing.
The 10 mm thickness is an ideal compromise between durability and stability and therefore a perfect solution for heavy circumstances, like installation on floor heating and/or installation in heavy traffic areas
Write a review
price incl. tax
0,00 €
per unit
price excl. tax.
0,00 €
per unit
SRP incl. tax
per unit
New
Delivery in 5-6 business days
Description
Data sheet
Accessories
Downloads
Reviews
Reviews
Description
Installation summary (full version available on www.crownbamboo.eu)
- Check room climate conditions (room temp. 18-20°C, air humidity 50-65%).
- Check subfloor: this should be flat/clean/stable and should not exceed the maximum allowed moisture content (for example 1.8% for sand cement).
- The floor should be fully glued (for glue details see full version of installation instruction).
- Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives only can be used, when: Shear strength Ts > 1.4 N/mm² (3 days balanced at 23 degrees Celsius/50% Air Humidity)
- Shear elongation y >=0.5 (3 days balanced at 23 degrees Celsius/50% Air Humidity) Please ask your glue supplier for more information.
- This floor type can be installed under certain conditions on warm water floor heating. See “Crownbamboo flooring and floor heating“.
- After installation: make sure proper cleaning and maintenance is done, fitting to the chosen finish
Data sheet
| Brinell hardness | ≥ 4 kg/mm² (SP/PP), ≥ 9,5 kg/mm² (EN 1534) |
| Shrink and swelling | 0,14% per 1% change in moisture content |
| Moisture content | 10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity |
| Gross density Bamboo | +/- 700 kg/m³ (SP/PP), +/- 1050 kg/m³ |
| Fire resistance | UNE 11925-2: Cfl-S1 |
| thermal conductivity | λ gleich 0.17 W m K |
| Thermal resistance | 0,0588 m² K/W (SP/PP), 0,0471 m² K/W (EN 12667) |
| Emission Formaldehyde | Class E0 ( 0,025 mg/m³) 3*) (EN 717-1) |
| Durability & strength | Class 5 (EN 350) |
| Use Class | Class 1 (EN 335) |
Accessories
Reviews